News at ezPlasma........

Why Bolt Together CNC Tables Are Not The Way To Go.....

ezPlasma CNC Cutter LogoPurchasing a CNC machine is a lot like buying a car, and can sometimes be a more costly investment. Of course just like anything you are buying; cost is always an issue, but nowhere does it say you should sacrifice quality for price. Unknowingly we all do so, when we don’t properly research all of our options. “Bolt together tables” It really sounds appealing… You’re getting CNC equipment at a ridiculously cheap price, and the only thing you have to sacrifice is a “little” man-hour to put the thing together. They will even give you a book, and a video to show you how to build it… This doesn’t sound so bad does it?

Why bolt together CNC tables aren’t the way to go”

  1. If the CNC Table is not pre-fabricated by the manufacturer, how was your machine tested before you received it? How do you know if the equipment you just spent thousands of dollars on even works?
  2. Those instructional guides were put together by technicians who have built many tables just like yours. So, of course, they will make it look like an easy task, but is it so easy after all? They will tell you it only takes 3 hours, but the reality is it will take days or even more.
  3. “Longevity of Precision” The absolute most important thing for a CNC Machine.
    Who wants to lay a very expensive piece of material on their table, and have the edges turn out looking like someone used a hack saw to cut it? Overtime those bolts that are holding the machine together will become loose, which will in turn drastically reduce the precision you once had. That is if you even had it all.
  4. An improperly squared, or calibrated table will cause premature failure in components such as; drives, motors, gears, bearings, and rails. These are all costly parts to replace and fix.

Here at ezPlasma we strive to make our equipment affordable for you, without sacrificing any of its quality. Because just like a car, we know that your machine has to be built in a way to withstand years and years of mileage and use.

What ezPlasma offers :

  • Fully tested before shipment
  • Fully assembled & welded steel frame
  • +/-.005 Resolution
  • Technical support for the life of the machine
  • A quality built machine at an affordable price

   ........News ezPlasma - February 19th........
ezPlasma XT Rail CNC Plasma Cutter using Hypertherm True Hole Technology

ezPlasma XT Rail CNC Cutter news
ezPlasma Rolls out the new XT Rail System. This machine features the following: 

  • I-Beam Construction
  • Steel Bridge Gantry
  • High Powered Servo Motors
  • Dual Drive 
  • Heat Treated Vacuum Hardened V-Groove Linear guide rails. 
  • Steel Pinion Gears
  • 1500 IPM Traverse Speed

We are True Hole Approved!
More Info: ezPlasma XT Rail CNC Plasma Cutter

Integrated Plasma Cutting Solutions
Hypertherm Tru Hole Chart news


  • Virtual elimination of hole taper
  • Ding and divot is reduced and biased to the outside of the hole. 
  • Delivers true "bolt-quality" holes. 
  • Narrows the gap with laser hole quality. 
  • Hole quality is delivered automatically without operator intervention.

ezPlasma CNC Cutter Logo
Making it easy to consistently optimize performance

  • Dramatic improvement in hole quality
  • Up to a 100% increase in productivity through cut/cut cycle time reductions
  • Achieve optimal consumable life without operator adjustment. 
  • Remote help makes it easy for OEMs to access the system within seconds via the internet to provide process support and/or troubleshoot the systems. 
  • Built in Hypertherm process expertise makes it easy to: 
  • Train new operators to cut like a pro within minutes
  • Maintain more consistent performance; operators-to-operator, shift-to-shift and site-to-site.
How Hypertherm True Hole Technology Works

Tru Hole Hypertherm ezPlasma CNC

Click Here to Get a Quote........


News at ezPlasma.....

CNC Plasma Cutter increases production....
"you sold us the right piece of equipment for the right job"

David paid a visit to one of our existing customers; Cross Cleaning Systems in Kilgore Texas. He provided us with some insight about his experience in purchasing their first CNC plasma cutting machine, and how his ez-Plasma CNC machine is benefiting their company, and work process.



ezPlasma News............
2013 Brings New XT Rail CNC Plasma Cutter........

XT Rail CNC Plasma Cutter

As the years go by, ezPlasma continues to grow, and add to our full line of CNC Plasma tables . This year we have introduced many new models; Including our newest ez-Plasma XT Rail CNC machine.

This particular machine is offered in any size, all the way up to 100 Feet in length. Its features include extremely durable I-Beam rails, a large steel tubing gantry, High precision vacuum hardened rails. This massive beast of a machine is ideal for large fabrication shops.

This past Week, we installed a 10'X20' ez-Plasma XT rail system in Plainview Texas. This CNC plasma Cutter is fully loaded, with the full suite of Hypertherm products; HPR400XD, Arc Glide Lifter, and Edge Pro Controller. Our builders, and Engineers have worked diligently the last 2 months building this unit from the ground up, and we are very excited to finally see our hard work pay off, when the machine is put in place at the customers facility.